PhoenixSlayer

Phoenix Service Software 2010.8.4.41526

2010-03-06T12:18:00.000-08:00

Simple update - just newer Phoenix version. Enjoy ;)

I get a lot of warnings about a virus in my releases. I am tired of this so: fixer.exe is not a virus, it is detected as virus only by NOD antivirus. If you don't trust me - look at this link: fixer.exe scanned at VirusTotal.com

Release Information:

This Phoenix Service Software installation package includes following SW components:
- Phoenix Service Software 2010.8.4.41526
- DK2 Dongle Driver v 7.14.0.25
- Nokia Connectivity Cable USB Driver v 7.1.23.0
- Flash Update Package 09.050.025
- FLS-x Dongle Driver v 2.09.28

Changes/improvements made from previous version 2009.34.14.40684:

New products added:
- RM-601, RM-656, RM-657, RM-659, RM-559, RM-610, RM-618, RM-639, RM-632, RM-633, RM-634
Products removed:
- RM-623
New features:
- Nokia Connectivity Cable USB Driver Version 7.1.23.0
- Flash Update Package 09.050.025
- Menu item WLAN Auto tune added for E72 product
- New RF Losses.ini v 47 for auto tune
- Product Code Change – window is now scalable, SW version information
for variants can now be seen if window is made larger.
Error corrections & changes:
- Support for FPS-8 and FPS-11 Flash Prommers removed
- Bluetooth Flasher – menu removed
- Flash Memory test removed
- Changes to WLAN UI to support new WLAN component versions
- Auto tuning components updated to new version
- Label printing changes to improve handling of older data package configurations. If product has older data package configuration, the user is advised to enable this option from the label printing UI
- Improvements to Data Package Download. When computer has active internet connection, product code specific SW files are downloaded from Firmware Repository. Please note that the path for downloading files must also be configures to “Options / Product Location” - UI. If paths
are not the same, downloaded SW files are not found.
- Registration error for manual TX power level tuning component corrected.
- Minor menu Changes for RM-598 and RM-604

Known errors & limitations:

- Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
- Flashing with Flashing with FLS-5, SS-46 and product specific adapter is not supported anymore
- If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating
FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
- Multi Flash has limited capabilities, launch Multiflash UI first and then connect phones one by one, do not attempt to service more than 5 phones at the time
- Some phone models request SIM Lock data to be written in wrong format. You should use special DLL as a workaround for this product software related problem. Please see Common SB SB-102 “Tucson Add-On Components for SIM Lock version”
- While performing restore or variant change operations with Tucson system firmware update as a separate activity may increase stability.
- Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
- FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version is needed to correct this, and it is estimated to be available during 2nd half of 2010
- Please refer to product specific documents and instructions concerning the limitations of the RX-51 product

Many greetings to those bitches who take others work and take credit for it :)Not only you made a terrible graphics for my setup, you also forgot to create proper uninstaller. Oh well ;)

Working Phoenix - only here ;)

Download: http://rapidshare.com/files/359894765/Phoenix_2010.8.exe

Phoenix Service Software 2009.34.7.40015

2009-10-29T12:18:00.000-07:00

Simple update - just newer Phoenix version. Enjoy ;)

Release Information:

SW components:
- Phoenix Service Software 2009.34.7.40015
- DK2 Dongle Driver v 7.14.0.25
- Nokia Connectivity Cable USB Driver v 7.1.17.0 (for Win2000 driver version 6.85.15.0)
- Flash Update Package 09.042.021
- FLS-x Dongle Driver v 2.09.28
- FPS-11 version 5.10.0

Changes/improvements made from previous version 2009.20.10.39068:
New features:
- Touch Screen Calibration
- ALS Tuning Wizard
COMMON SW SB-107 Copyright ? Nokia Corporation 2009
Error corrections & changes:
- Flash Update Package 09.042.032
- New rf_losses.ini
- Product Code change improvements for RX-51
- Dynamic Country of origin in label printing shows country names in clear text if product specific configuration / data package supports it.
- Several improvements for the RX-51 product, please refer to product specific Service Bulletins for further instructions
- Changes to DCT-4 IMEI / ESN rebuild.
Known errors & limitations:
- Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
- Flashing with FLS-5, SS-46 and product specific adapter is not reliable for all BB 5.0 products.
- If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package
and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix ôPrommer maintenanceö is looking for the files
from the correct location which is ôC:Program FilesCommon FilesNokiaTssFlashö. If not, Phoenix will show error ôUpdate via ini u file failedö. In this case, select ôUpdateö from that
Phoenix ôPrommer maintenanceö u UI, browse to correct directory and select ôfpsxupd.iniö for all other prommers except the FPS-8.
- Multi Flash has limited capabilities, launch Multiflash UI first and then connect phones one by one, do not attempt to service more than 5 phones at the time
- Some phone models request SIM Lock data to be written in wrong format. You should use special DLL as a workaround for this product software related problem. Please see Common SB SB-102 Tucson Add-On Components for SIM Lock version
- While performing restore or variant change operations with Tucson system firmware update as a separate activity may increase stability.
- DCT-4 IMEI / ESN Rebuild functionality is limited. Corrections will be available when new Flash Update Package is released during week 45/2009
- Operating band reading / writing may not work for all products (e.g. RM-159), due to implementation in phone SW. Phoenix modifications will be available in an additional Phoenix release
estimated for week 43/2009. This function can also be done via phone keypad.
- Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
- FPS-21 flashing for RX-51 works only with TCPIP connection, if FPS-21 prommer HW is older than 10. USB connection works if FPS-21 HW is 10 or newer.

Also, because of numerous requests I will also provide you with unmodified Phoenix (for those with third-party HW equipment).

Download: http://rapidshare.com/files/299680024/Phoenix_2009.34.7.exe

Original (not cracked) setup: http://rapidshare.com/files/299685841/Phoenix_Service_Software_2009_34_7_40015.exe

Phoenix Service Software 2009.34.6.39750

2009-10-13T01:38:00.000-07:00

New release - new improvements to the setup:

- uninstall routine used to cause problems on some machines - I had to do a rollback, for now it just uninstalls Phoenix and its runtimes, it leaves Connectivity Cable Driver , I will keep working on it, don't worry,- removed (finally!) root.exe and tray.exe processes - also no TSS API or DK2 dongle is installed.

Original Release Information:

MULTI PROTOCOL PHOENIX SERVICE SOFTWARE 2009.34.6.39750
File type : Phoenix Multi Protocol & Bulletin
Region : GLOBAL
Published : 02/10/2009
Size : 132.3 MB

Description
* Multi protocol (including support for CDMA, GSM, TDMA and WCDMA)

This Phoenix Service Software installation package includes following SW
components:

* Phoenix Service Software 2009.34.6.39750
* DK2 Dongle Driver v 7.14.0.25
* Nokia Connectivity Cable USB Driver v 7.1.17.0 (for Win2000 driver
version 6.85.15.0)
* Flash Update Package 09.038.019
* FLS-x Dongle Driver v 2.09.28
* FPS-11 version 5.10.0

Changes/improvements made from previous version 2009.20.10.39068:

New products supported:

* RM-614,RM-635, RM-559, RM-551, RM-552, RM-615, RM-381, RM-598,
* RM-604, RM-588, RM-594, RM-593, RM-625, RM-612, RM-622, RM-623,
* RM-624, RM-596, RM-597, RM-576, RM-577, RM-584

Product support removed:

* RM-541

New features:

* Touch Screen Calibration
* ALS Tuning Wizard

Error corrections & changes:

* Flash Update Package 09.038.019
* Autotuning improvements
* Correction to “Autotune PAPI SOAP Error”
* Improvements for occasional “Data Package Not Found” – error during
flashing
* Changes to label printing
* Information shown on the UI if font “Arial Narrow” can not be found on
your PC
* Please check the label after printing, so that all texts are properly
aligned
* If your label looks ok, you don`t need to do anything.
* If you detect any problems, l “Arial Narrow” font needs to be installed. It
is normally included for example in the Office package.

Known errors & limitations:

* Software downgrade with Tucson system is only possible for BB 5.0
products supporting the Data Package 2 concept.
* Flashing with FLS-5, SS-46 and product specific adapter is not reliable for
all BB 5.0 products.
* If you install old DCT-4 data packages, Flash Update Package File
installation path may be wrong. This is caused by very old DCT-4 data
packages which contain Flash Update Package and overwrite current
information during installation. If you experience problems when updating
FPS-x prommers, please check that Phoenix “Prommer maintenance” is
looking for the files from the correct location which is “C:\Program
Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error
“Update via ini – file failed”. In this case, select “Update” from that Phoenix
“Prommer maintenance” – UI, browse to correct directory and select
“fpsxupd.ini” for all other prommers except the FPS-8.
* Multi Flash has limited capabilities, launch Multiflash UI first and then
connect phones one by one, do not attempt to service more than 5
phones at the time
* Some phone models request SIM Lock data to be written in wrong format.
You should use special DLL as a workaround for this product software
related problem. Please see Common SB SB-102 “Tucson Add-On
Components for SIM Lock version
* While performing restore or variant change operations with Tucson
system firmware update as a separate activity may increase stability.
* DCT-4 IMEI / ESN Rebuild functionality is limited. Corrections will be
available in an additional Phoenix release estimated for week 43/2009
Operating band reading / writing may not work for all products (e.g.
RM-159), due to implementation in phone SW. Phoenix modifications
will be available in an additional Phoenix release estimated for week
43/2009. This function can also be done via phone keypad.

Download: http://rapidshare.com/files/292366448/Phoenix_2009.34.exe

Phoenix Internal Service Software 2009.17.0.38220

2009-10-12T14:50:00.000-07:00

Latest Phoenix Internal, ready to use :)

Remember you can easily brick your phone if you're not careful using this version.

Download: http://rapidshare.com/files/292647069/Phoenix_Internal_2009.17.exe

Phoenix Service Software 2009.20.10.39068

2009-07-20T23:19:00.000-07:00

New release - new improvements to the setup:

- Phoenix is now preconfigured to use USB connection,
- Setup asks for uninstallation of all the remaining drivers and runtimes (previously they were kept in case they were in use by other programs),
- Setup size reduced by 15 MB (yay!),

Happy downloading and using :)

Original Release Information:

PHOENIX SERVICE SOFTWARE 2009.20.10.39068
Published : 14/07/2009

-DK2 Dongle Driver v 7.14.0.25
-Nokia Connectivity Cable USB Driver v 7.1.17.0 (for Win2000 driver version 6.85.15.0)
-Flash Update Package 09.23.12.4
-FLS-x Dongle Driver v 2.09.28
-FPS-11 version 5.10.0

Changes/improvements made from previous version 2009.12.7.38366

New products supported:
-RM-540, RM-590, RM-591, RM-572, RM-586, RM-541, RM-536, RM-535, RM-537, RM-570, RM-531, RM-558, RM-555, RM-553, RM-600, RM-497, RM-599, RM-573, RM-504, RM-455

Product support removed:
-RM-568, RM-562, RM-563

Error corrections & changes:
-New FLS-x Drivers improving FLS-5 stability
-Flash Update Package 09.23.12.4
-Menu changes:
-Product Verification removed from Product – menu
-Layout of Firmware Update / Options UI in Flashing – menu update
-Display Tune for S60 products removed from Tuning – menu
-PPC / FaultLog Archive & Send removed from Tools – menu
-Following obsolete Licence Automation – related menu items removed. Due to this change only Tucson system with related Phoenix menu items can be used for restore / variant change activities.
-Certificate Restore ( BB 5.0 generation products)
-IMEI /ESN Rebuild (DCT-4 generation products)
-Variant SWAP (DCT-4 generation products)
-Label Printing can be configured to use manual selection for Country Of Origin. Product specific data package may contain new label printing configuration in XML format. Please see product specific Technical Bulletins for further instructions.
-Operating Band reading / writing works only in test mode.

Download: http://rapidshare.com/files/258159131/Phoenix_2009.20.exe

Jaf 1.98.62 - new installer

2009-06-17T02:13:00.000-07:00

This release of JAF with new installer brings several improvements:

- you are no longer asked if you want new cable drivers, latest are installed,
- there is no need to launch PKEY Emulator, it runs automatically,
- you will no longer see "Box driver not installed" error

JAF allows you to upgrade, downgrade, cross-flash and repair dead phone using USB cable. No additional equipment needed (no box, no pkey) - though many functions require box to be present.

Download: http://rapidshare.com/files/245475090/jaf_1.98.62_setup.exe

Phoenix (Internal) 2009.12 - improved setup

2009-05-31T09:21:00.000-07:00

I decided to drop the old installer and create something more flexible. Changelog:

- works with Windows 7/Vista (32 bit) - as of Win7 RC1,
- you can install Phoenix Internal during setup,
- you can uninstall Phoenix via Control Panel or Start Menu icon,
- setup loads much faster (due to reduced compression ratio),
- reduced (even more) risk of installation problems,

I am pretty sure I have covered all the goals I was facing when I started to release Phoenix. I will concentrate on updating Phoenix to latest versions.

Download: http://rapidshare.com/files/239297039/Phoenix_2009.12_v2.exe

Phoenix Service Software 2009.12.7.38366

2009-05-16T23:52:00.000-07:00

Simply download and enjoy. Check release information below.

I have no idea if it works on Windows 7 on Virtual XP machine - but it surely doesn't work in native Windows 7 environment. Let me know if it works on virtual XP.

MULTI PROTOCOL PHOENIX SERVICE SOFTWARE 2009.12.7.38366
Published 08/05/2009 Size 131.4 MB
APAC - Service Software & Driver -> Phoenix & Bulletin
File type -> . Phoenix Multi Protocol & Bul

1. CHANGE HISTORY
Version 1 06.05.2009 Initial version
2. INTRODUCTION
New version of Phoenix service software is available. This multi-protocol service software supports Nokia
CDMA, GSM, TDMA, and WCDMA products.

Main component versions in the release:
• DK2 Driver Version 07.14.0.25
• Nokia Connectivity Cable USB Driver Version 7.1.16.0 (For Win2000 driver version 6.85.15.0)
• Flash Update Package 009.018.010
• FLS-x Drivers Version 2.09.26
Version 1 06.05.2009 Initial version
• FPS-11Version 5.10.0

3. CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2008.04.11.37849
New products supported:
• RM-578, RM-579, RM-508, RM-547, RM-566, RX-51, RM-565, RM-546, RM-529, RM-530, RM-
491, RM-564, RM-562, RM-563

New features
• New rf_losses.ini ver.40 for autotune function

Error Corrections & changes
• Improvements to N96 USB Flasing
• Flash Update Package 09.18.10.8 with improve,ments to random “finalization failed” – problems for
models with OMAP2420.
• Corrections for Network Prommer Maintenance
• Improvements for Tucson Product Code Change and BB5 Certificate Restoring with “Flash Phone”
– option selected.
• Improvements for connection manager when used with FLS-5

4. KNOWN ERRORS & LIMITATIONS
• Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data
Package 2 concept.
• Flashing with FLS-5, SS-46 and product specific adapter is not reliable for all BB 5.0 products,
new driver release with corrections will be released soon.
• Flash Update Package File installation path may be wrong. If you experience problems when
updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the
files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not,
Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix
“Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other
prommers except the FPS-8.
• Multi Flash has limited capabilities, launch Multiflash UI first and then connect phones one by one,
do not attempt to service more than 5 phones at the time

5. INSTALLATION
If you have Phoenix External 2007.4.6.170 or older you must uninstall it before installing this release.

1. Download Phoenix_Service_Software_2009_12_7_38366.exe application file to your computer
(e.g. C:\TEMP).
2. Close all other programs.
3. Run Phoenix_Service_Software_2009_12_7_38366.exe and follow instructions on the screen to
install Phoenix Service Software
4. Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the screen
5. If you are prompted to update any existing driver or file versions, select “yes”.
6. Depending on the operating system, the PC may require rebooting.
7. Allow Windows to register the Phoenix components.
8. Open Phoenix and update your prommer with the latest software included in this installation
package.
9. Use the latest available product specific data packages or flash bundles with new multi-protocol
Phoenix.
Supported operating systems and user rights
• Windows 2000 Service Pack 4 or higher
• Windows XP Service Pack 1 or higher
• When installing Phoenix into Win 2000 or XP you must have local admin rights.
• When using in Win 2000 or XP, user must have power user rights.

For HW & Tool requirements please refer to Service Repair Processes TB-209
For information on product specific data packages, tools and instructions please refer to service manuals and technical bulletins.
If you want to use FPS-11, please download separate FPS-11 driver package
If you are installing this version of Phoenix on a new Imaged PC, and you are using an FLS-4S or FLS-5
during the install, then install the FLS-X drivers first.

Download: http://rapidshare.com/files/233910028/Phoenix_2009.12.7.38366.exe

Zulea BB5 & BB5+ free unlocker 1.03

2009-04-04T04:17:00.001-07:00

With this software you can unlock majority of BB5/BB5+ phones over FBUS cable. You need box like JAF/UFS+Tornado to use this software, although no PKEY is needed. Latest version fixes many problems from previous releases. It doesn’t work over USB but at least you don’t have to pay for it.

Supported models:

RAPIDO:
N95 (RM-159), N95 (RM-245), N95 (RM-160), E90 (RA-6)

RAP3GV2 models:
6630 (RM-1), 6680 (RM-36), 6681 (RM-57), 6682 (RM-58), N70 (RM-84), N70-5 (RM-99), N71 (RM-67), N90 (RM-42), N91-1 (RM-43), N91-8GB (RM-43), N91-5 (RM-158), N93 (RM-55)

Rap3Gv3 phones:
3109c (RM-274), 3110c (RM-237), 3250 (RM-38), 3500c (RM-272), 3500cb (RM-273), 5200 (RM-174), 5200b (RM-181), 5300 (RM-146), 5300b (RM-147), 5500 (RM-86), 5700 (RM-230), 5700 (RM-302), 6085 (RM-198), 6086 (RM-188), 8086b (RM-260), 6125 (RM-178), 6126/6133 (RM-126), 6131 (RM-115), 6131 NFC (RM-216), 6136 (RM-199), 6151 (RM-200), 6233 (RM-145), 6234 (RM-123), 6280/6288 (RM-78), 6290 (RM-176), 6300 (RM-217), 6300b (RM-222), 7370 (RM-70), 7373 (RM-209), 7390 (RM-140), 8600 (RM-164), E50 (RM-170), E50 (RM-171), E50 (RM-172), E61 (RM-89), E61i (RM-227), E62 (RM-88), E65 (RM-208), N73-1 (RM-133), N73-5 (RM-132), N75 (RM-128), N76 (RM-135), N76 (RM-149), N77 (RM-194), N80-1 (RM-92), N80-3 (RM-91), N92 (RM-100)

bb5+:
3120C, 3555, 3555b, 5310 - (V58.58; V59.59 NOT SUPPORTED), 5310b, 5610, 5610d, 6263, 6300i, 6301, 6500S - (V59.60 NOT SUPPORTED), 6500C - (V59.45 NOT SUPPORTED), 6555, 7500, 7900, 8800

Phoenix Service Software 2009.4.12.37934

2009-04-02T17:36:00.001-07:00

New Phoenix Service Software, new setup improvement: Recent changes to the installer caused some trouble on certain configurations – so now they are optional. Use them only if Phoenix fails to install – run setup again, this time enable experimental registry cleaning.

This Phoenix Service Software installation package includes following SW components:

- MSXML 6.0 Parser
- VC++ redistributable
- Phoenix Service Software 2009.4.12.37934
- DK2 Dongle Driver v 7.14.0.25
- Nokia Connectivity Cable USB Driver v 7.1.8.0 (for Win2000 6.85.15.0)
- Flash Update Package 09_12_05_14
- FLS-x Dongle Driver v 2.09.26
- FPS-11 version 5.10.0

Flash Update Package is 09_12_05_14 - you can flash N96 without problems. As always, only USB cable needed, enjoy!

If you like my work, consider donating some money (I have some expences because of my studies). Every cent will be appreciated! :)

DOWNLOAD: http://rapidshare.com/files/216760914/Phoenix_2009_4_12_v2.exe

JAF 1.98.62 + Crack

2009-01-20T06:20:00.001-08:00

Works both with USB cable and UFS boxes. Allows to downgrade (and possibly dead flash over usb) all bb5 phones. Also reads security code and creates certificate backup.

http://rapidshare.com/files/186146404/JAF.1.98.62.rar

BB5 No TP Unlocker 1.03 + crack

2009-01-20T05:50:00.001-08:00

For all those in need for unlock software. Latest version of Cinek’s tool from JAF support area with cracks. Works the same as BB5 King, BB5 Prince, BB5 Queen, and many, maaany other clones.

You have to download and install JAF (see above post) to make it work.

http://rapidshare.com/files/186565564/bb5-no.tp.1.03.rar

Phoenix Service Software 2008.44.5.36625 – v. 2

2009-01-02T14:36:00.001-08:00

This release contains improved installer, changes:

- installs over old Phoenix, even if it can’t be properly uninstalled,
- removes flsdevcp.exe and tray.exe from autostart and memory,
- removes DK2 Network Server menu form Menu Start,
- no longer installs fls4.exe,
- new user interface, just because I wanted it to look better:

If you already have Phoenix 2008.44 installed, you don’t need this release. However, if you had any problems installing previous versions, this one should install properly.

DOWNLOAD: http://rapidshare.com/files/179193407/Phoenix_2008_44_5_v2.exe

Phoenix Service Software 2008.44.5.36625

2008-12-09T07:50:00.001-08:00

New release of Phoenix Service Software 2008.44.005.36625. Works over usb cable.

Download: http://rapidshare.com/files/171793077/Phoenix_2008_44_5.exe

Phoenix Internal Service Software 2008.41.4.35870

2008-12-05T02:44:00.000-08:00

What is new:

Internal version - means you can edit PM areas and do much more if having service hardware,
Improved setup

Screenshots:

http://rapidshare.com/files/170494978/Phoenix_Internal_2008_41_4.exe

WARNING: Using this version requires you to be extra careful, there were accidents of bricking phone - they can be revived only by MT-BOX (JAF can't repair them). Download and use at your own risk.

You can always use previous, safe versions.

Phoenix 2008.34.10.36039 - improved setup / false-positives fix

2008-12-04T04:50:00.000-08:00

As I got some complaints about W32/Agent.OBH.Trojan found in files - I would like to make it clear:

The problem with fixer is that it's made with Diablo2oo2's Universal Patcher which apparently in some cases may be recognized as a trojan - mainly in process of unpacking and launching executable from patch (it contains small msi file to re-register some phoenix dlls). This setup is not, and never was, harmful.

After few hours I managed to "clean" setup from this false-positive alerts, it also has additional improvements:

Setup no longer causes antivirus alerts, proof:

New version: http://www.virustotal.com/analisis/4394a4570a357cb215a4af412da5257c
Old version: http://www.virustotal.com/analisis/bb4acc0c7e0ee5f19230da3e791f1a86
Setup is now even more silent (two driver alerts which I can't get rid of = 3 mouse clicks to install),
Phoenix should now install properly no matter where your Program Files folder is,
Setup is tested to run properly on Vista in most cases (but it may fail miserably as well as in windows xp).
Note: Nokia doesn't support Phoenix on Windows Vista. Although Phoenix will install properly, other problems may occur. I give no warranty for it.

If you have already downloaded previous version and it is working for you - there is no reason to download this one. If you had problems with previous versions, this one should install properly.

DOWNLOAD: http://rapidshare.com/files/170187361/Phoenix_2008_34_10-v2.exe

Phoenix Service Software 2008.34.10.36039

2008-10-29T04:29:00.000-07:00

DOWNLOAD: http://rapidshare.com/files/160646937/Phoenix_2008_34_10.exe

Multi protocol (including support for CDMA, GSM, TDMA and WCDMA) Phoenix Service Software version 2008.34.10.36039 has been released.

If you have any older Phoenix version, you must uninstall it before installing this release.
Note! If you are installing this version of Phoenix on a new Imaged PC and you are using FLS-4S or FLS-5 during the installation, then install the FLS-drivers first, please see SB-082.

In order to use FPS-11, you may need to install a separate package (released separately on NOL).

This Phoenix Service Software installation package includes following SW components:

- Phoenix Service Software 2008.34.10.36039
- DK2 Dongle Driver v 7.14.0.25
- Connectivity Cable Driver 7.1.6.0
- FLS-x Dongle Driver v 2.09.20
- Flash Update 08.43.15

Recommended PC HW requirements:

- Computer Processor: Pentium 4 or above or equivalent
- RAM 1 GB
- Minimum free hard disk space 100 GB depending on installed product data packages

Supported Operating Systems:

- Windows 2000 Service Pack 4 or higher
- Windows XP Service Pack 1 or higher

When installing Phoenix into Win2000 or XP you must have local admin rights.
For using the Phoenix in Win2000 or XP, user must have power user rights. After installing Phoenix Service Software, please install latest product specific data package or SW bundles; do not use old data packages or SW bundles.

Supported phone models:

The list of supported models is available once Phoenix is installed by navigating to the Open Product under the File menu.

Changes/improvements made to from v 2008.34.6.35199 to v 2008.34.10.36039:

For GSM / WCDMA:

- Support for new products added: RM-493, RM-494, RM-459R, RM-496, RM-458, RH-121, RH-122
- Flash update 08.4236.15 is added
- N series flashing issue with FPS-10 and FPS-21 are fixed
- New “RF Final Test” under “Testing” menu.

This Final test works with the same set-up (disassembled phone in a module-jig) and test-equipment (refer to” Recommended Equipment document”) like the “Auto-Tune” function under Tuning.

To run this new Test function correctly also the product specific Data Package has to support this function. Therefore it is required to install a new major Data Package. Please refer to the product specific Service Bulletin accordingly.

Note: New data packages (supporting this test function) will require this Phoenix version. With any previous Phoenix version the “Auto-Tune” function will have errors in most steps because new test steps will be used also in this tuning process.

The first products planed to support this Tests function soon are: RM-159, RM-160, RM-245, RM-265, RM-397, RM-240 and RM-278, other products will follow step by step. Existing product data packages can be used with this Phoenix version except the new “RF Final Test” function under “Testing”.

Known limitations/errors:

- E-66 USB flashing is not supported

- FLS-5 has limited capabilities with BB-5 (E71, N79, N81 and N96) “bootcode is invalid” error may occur

- Multiflash has limited capabilities:

- Launch Multiflash UI first and then connect phones one by one

- Do not attempt to service more than 5 phones at a time

Phoenix Service Software 2008.34.6.35199

2008-09-23T10:12:00.001-07:00

As previous - works without dongle over usb cable. If it doesnt install - try doing it on a fresh system. Tested on virtual machine works perfectly (I have no time to reinstall system to try it on my hardware).

Download: http://rapidshare.com/files/147796012/Phoenix_2008_34-V1.exe

Description:

This Phoenix Service Software installation package includes following SW components:

- Phoenix Service Software 2008.34.6.35199
- DK2 Dongle Driver v 7.14.0.25
- Connectivity Cable Driver 7.0.2.0
- FLS-x Dongle Driver v 2.09.20
- Flash Update 08.36.02

Recommended PC HW requirements:
- Computer Processor: Pentium 4 or above or equivalent
- RAM 1 GB
- Minimum free hard disk space 100 GB depending on installed product data
packages

Supported Operating Systems:
- Windows 2000 Service Pack 4 or higher
- Windows XP Service Pack 1 or higher
Supported phone models:
The list of supported models is available once Phoenix is installed by
navigating to the Open Product under the File menu.

Changes/improvements made to from v 2008.20.9.34260 to v
2008.34.6.35199:
For GSM / WCDMA:
- Support for new products added: RM-442, RM-443, RM-368, TMO US
RM-490, RM-415, RM-348, RM-349, RM-350
- Rf_losses.ini ver38
- Flash Update 08.36.02 is added
- New FLSX drivers 2.09.20 are added
- N73 atutotune fix included
- Wimax test has been added

Known limitations/errors:
- Phone models N82, N95 and N6110 fails to flash using FPS-10, FPS-20
and FPS-21. On possible solution is to flash the listed phone with USB
cables (N95 => DKE-2)
- Multiflash has limited capabilities:
- Launch Multiflash UI first and then connect phones one by one
- Do not attempt to service more than 3 phones at a time

Phoenix Service Software 2008.20.9.34260

2008-08-19T06:25:00.000-07:00

Features:

all needed files/drivers in single exe package
silent installation (except dongle patch),
works without dongle over usb cable,
you can now uninstall this version (if it doesn't work let me know i tested it on 2 machines).

Virus/Spyware/Adware Free - checked with Kaspersky Antivirus.

http://rapidshare.com/files/138497978/Phoenix_2008_20-V3.exe