Phoenix Service Software 2008.34.10.36039

DOWNLOAD: http://rapidshare.com/files/160646937/Phoenix_2008_34_10.exe

Multi protocol (including support for CDMA, GSM, TDMA and WCDMA) Phoenix Service Software version 2008.34.10.36039 has been released.

If you have any older Phoenix version, you must uninstall it before installing this release.
Note! If you are installing this version of Phoenix on a new Imaged PC and you are using FLS-4S or FLS-5 during the installation, then install the FLS-drivers first, please see SB-082.

In order to use FPS-11, you may need to install a separate package (released separately on NOL).

This Phoenix Service Software installation package includes following SW components:

- Phoenix Service Software 2008.34.10.36039
- DK2 Dongle Driver v 7.14.0.25
- Connectivity Cable Driver 7.1.6.0
- FLS-x Dongle Driver v 2.09.20
- Flash Update 08.43.15

Recommended PC HW requirements:

- Computer Processor: Pentium 4 or above or equivalent
- RAM 1 GB
- Minimum free hard disk space 100 GB depending on installed product data packages

Supported Operating Systems:

- Windows 2000 Service Pack 4 or higher
- Windows XP Service Pack 1 or higher

When installing Phoenix into Win2000 or XP you must have local admin rights.
For using the Phoenix in Win2000 or XP, user must have power user rights. After installing Phoenix Service Software, please install latest product specific data package or SW bundles; do not use old data packages or SW bundles.

Supported phone models:

The list of supported models is available once Phoenix is installed by navigating to the Open Product under the File menu.

Changes/improvements made to from v 2008.34.6.35199 to v 2008.34.10.36039:

For GSM / WCDMA:

- Support for new products added: RM-493, RM-494, RM-459R, RM-496, RM-458, RH-121, RH-122
- Flash update 08.4236.15 is added
- N series flashing issue with FPS-10 and FPS-21 are fixed
- New “RF Final Test” under “Testing” menu.

This Final test works with the same set-up (disassembled phone in a module-jig) and test-equipment (refer to” Recommended Equipment document”) like the “Auto-Tune” function under Tuning.

To run this new Test function correctly also the product specific Data Package has to support this function. Therefore it is required to install a new major Data Package. Please refer to the product specific Service Bulletin accordingly.

Note: New data packages (supporting this test function) will require this Phoenix version. With any previous Phoenix version the “Auto-Tune” function will have errors in most steps because new test steps will be used also in this tuning process.

The first products planed to support this Tests function soon are: RM-159, RM-160, RM-245, RM-265, RM-397, RM-240 and RM-278, other products will follow step by step. Existing product data packages can be used with this Phoenix version except the new “RF Final Test” function under “Testing”.

Known limitations/errors:

- E-66 USB flashing is not supported

- FLS-5 has limited capabilities with BB-5 (E71, N79, N81 and N96) “bootcode is invalid” error may occur

- Multiflash has limited capabilities:

- Launch Multiflash UI first and then connect phones one by one

- Do not attempt to service more than 5 phones at a time